Blog

Bluebird Book丨Measured FR8016HA power consumption performance

2023-06-12 17:35

We conducted actual power consumption tests on the commonly used low-power Bluetooth chip FR8016HA. FR8016HA is a BLE5.1 Bluetooth chip, widely used in IOT application scenarios. It has excellent product performance and power consumption.

Features

Bluetooth 5.1 certification

CortexM3 processor 48MHz main frequency

Built-in 512KB/1MB Flash for user programs and data

Built-in 150KB ROM to store BLE Profile&GATT,LM,LC

Built-in 48KB SRAM

Built-in power management module PMU (charging current up to 200mA)

16-Bit audio Codec (DAC SNR 96dB, ADC SNR 84dB)

Support Bluetooth master-slave multi-connection, (BLE MESH+10 BLE link)

Provide Apple Homekit development kit, Amazon ECHO development kit, Alibaba Tmall Genie development kit

Operating temperature range -40℃ to 105℃

Package

QFN32-4*4

Reference schematic

 

[Below is the actual measured data]

Test conditions:

● Test temperature: 25℃

● Test location: Laboratory

● Test object: Development board [FR8016HA]

● Test instrument: DMM6500

● Test method: The FR8016HA power consumption test group should be conducted using the DMM6500 multimeter, and the DMM6500 digital multimeter is used as a reference for standard power consumption data.

● Preparation before the test: Use USB as the only power supply for the development board, and connect the DMM6500 digital multimeter in series at the power supply end of the Bluetooth chip. The test connection is as shown below:

Test content:

1. Standby current test:

After the Bluetooth development board is powered on and initialized, it enters the sleep state without any key operation. The standby current is detected at this time. The test time is 1 minute, and the average current is recorded.

 

Results: Average current in standby mode is 7.3064uA

2. Broadcast power consumption current test

Broadcast interval: 1.875s

Antenna: Onboard antenna

Antenna power: 6dbm

Recording time: 1min

Number of broadcasts per minute: 32 times

Results: Average broadcast current is 33.48752uA

3. Connection status query event current test

Connection interval is 1.5s

Sent data: None

Received data: None

Test time: 1min

Number of connection status queries in 1min: 40 times

Result: Connection status query average current = 37.4021uA

Okay, the relevant data has been shared. Interested friends are welcome to communicate at any time. See you next time.